10 pcs of sensors Dallas DS18B20, DS2438 (Unica 1wire sensor. On the UAP it connects to input 10, 17, 15 and 23 where 10 + 17 is wired to one relay and 15 + 23 to another. Nelo to udlat jednodueji, staí je spolen pipojit a ve je pipraveno k pouití. Rychlé zprovoznní Plug & Play: Loxone Relay Extension a Loxone Miniserver jsou výborná dvojka. 2xanalog outputs - output voltage 0 - 10V Currently I use the Loxone Relay Extension (basically classic relays) through which I wired a cable on which I run 24V DC if the relay is on. Díky Relay Extension mete ovládat a 7 aluzií nebo spínat a 14 svtelných okruh. 2x analog inputs - input voltage 0 - 10V, resolution 1024 bitů 4x digital outputs Low side switch - load current max 2A for 1 output, max 24V DC 4xdigital outputs High side switch - load current max 2A for 1 output, max 24V DC input current 7A/5A at 230V AC for 1 output The Loxone Relay Extension is a true power house and with its fourteen 16A rated relays it will switch even the heaviest loads with ease. 12xrelay outputs - galvanically separated, max. 24x digital inputs - optically separated, max. Version 2.1 - better protection of internal power supply, removed bug for L4 output, improved EMC compatibility There can be connected up to 15 Railduino modules within the same network/bus. Both types of connections communicate using UDP protocol (User defined protocol). Der Bus wird mit zwei Adern (Link+ und Link-) von Gerät zu Gerät geführt. es ist nicht möglich, andere CAN-Bus Geräte an den Loxone Link anzuschließen. Das Busprotokoll ist dennoch proprietär, d.h. Inputs/outputs can be read/controlled by communication bus RS485 or by LAN within computer network. Der Loxone Link (früher als 'LoxBUS' bezeichnet) basiert technisch auf dem CAN-Bus. Module can handle 1-wire devices (Maxim/Dallas) as favourite temperature sensors DS18B20 or DS2438 ( Unica 1wire sens. There are also relay, digital and analog outputs - see the table below. Module is equipped with both digital and analog inputs. lights, pumps etc.) using outputs or sense the values at the inputs of the module (e.g. With this connection the control system is able to control external devices (e.g. Loxone) as so called distributed inputs / outputs.
0 Comments
Leave a Reply. |